Brand Name : UV/Yoway
Model Number : PH8-1200-190
Certification : CE,ROHS/UL
Place of Origin : ZHEJIANG, CHINA
MOQ : 10 pcs
Price : 100
Payment Terms : L/C, T/T, Western Union
Supply Ability : 10000 pcs per month
Delivery Time : 5 days
Packaging Details : paper box packing
name : electronic ballasts 206W
Inpurt wattage : wattage 206 max
application : two pcs 42-75 w uvc lamps
warranty : 24 months
voltage : 240v -110v
material : iron
206w Electric Ballasts For Two Pcs 42w-75w UVC Lamps Ballasts
The basic composition of the ultraviolet sterilizer is the ultraviolet germicidal lamp tube and the power distribution system. The main part of the power distribution system is the ballast. Therefore, it can be said that the ultraviolet sterilizer is composed of ultraviolet germicidal lamps and ballasts.
According to the disinfection specification for ultraviolet sterilizers promulgated by the Ministry of Health, when the power supply voltage is 220V, the ultraviolet radiation intensity of 253.7nm wavelength must not be lower than 70μW/cm2, and the level of ultraviolet intensity directly affects the effect of disinfection. The UV intensity depends on the matching of UV germicidal lamps and ballasts. At present, most of the ballasts of ultraviolet sterilizers use electronic ballasts.
Electronic ballasts have the advantages of energy saving and consumption reduction, rapid low-voltage start-up, and high power factor. They have become a replacement product for ultraviolet germicidal lamps to start, and are basically used in ultraviolet germicidal lamps. The main reasons are low cost and low failure rate. Good quality and high power factor. The ultraviolet sterilizer manufacturer Shijiazhuang Lingzhuo Environmental Protection Equipment Co., Ltd. can find through experiments that when the same ultraviolet germicidal lamp is replaced with an electronic ballast, the power consumption can be reduced by more than 25%, while the radiation intensity can be increased by more than 12%. Tube life is greatly extended. Especially for some ultraviolet germicidal lamps that use inductive ballasts and the radiation intensity does not meet the disinfection requirements, as long as the radiation intensity is above 60μW/cm2, when switching to electronic ballasts, the requirements can be basically met.
Electronic ballasts do not have high requirements on the power supply voltage of UV sterilizers. As long as the power supply voltage is higher than 180V, the minimum radiation intensity of 70μW/cm2 can be achieved. Ultraviolet sterilizers replace traditional magnetic ballasts with electronic ballasts. Although the one-time investment is relatively high, in the long run, its potential economic benefits are very considerable. Of course, the premise of realizing the above functions is that the ultraviolet germicidal lamp and the ballast must be matched.
When the electronic ballast of the ultraviolet sterilizer is more powerful than the ultraviolet germicidal lamp, the ultraviolet germicidal lamp is easy to ignite, but the ultraviolet germicidal lamp is easy to age and shorten its life. Because the inductive reactance of the electronic ballast is too small and the passing current is too large, the voltage at both ends of the ultraviolet germicidal lamp is too high, and the life of the filament is reduced. When the power of the electronic ballast is too small than the power of the ultraviolet germicidal lamp, it is difficult or impossible to ignite. Because the inductive reactance of the ballast is too large and the passing current is too small, the voltage across the ultraviolet germicidal lamp is too low, and the filament cannot be ignited. Therefore, the power of the electronic ballast is higher than that of the ultraviolet germicidal lamp, and the lamp tube bears too much current, and the life of the ultraviolet germicidal lamp is reduced.
This is our company's description of the importance of matching the UV sterilizer germicidal lamp and ballast.
2 Years Warranty 206w UV Electronic Ballast UVC Lamp Ballasts Images